Dish Tv Antenna Installation

n job of a dish antenna is to collect the highaddress. After entering the zip code, further
quality digital signal from geosynchronous satellite.instructions regarding the fine tuning of the dish
Therefore it is extremely important to perfectlyantenna will pop up on your TV screen. You need
align the antenna so as to get the best qualityto follow those instructions very carefully.
reception. If you do not then you would not beSTEP — 2
able to get the best picture quality in yourYou need to place the antenna is a suitable place
television set.where it can have proper reception from the
Alignment of a Dish TV antenna is not so difficult.geosynchronous satellites that are hovering in
You can easily do it on your own. All you need isspace. You must maintain nineteen degree
proper tools such as nut driver, adjustableelevation angle. At this angle, the antenna would
wrench, coaxial cables, screw drivers and mastbe able to get unobstructed signals from all three
hardware to do this on your own. It is verygeosynchronous satellites. Don’t forget to
important for you to install the antenna in aface the dish antenna to the southern skies since
proper angle. You need to see that the antenna isthe satellites are placed in that direction.
located in an open space and you must alsoSTEP — 3
ensure that the signal path is free from any sortAfter going through the first two steps, it is time
of obstruction such as trees and tall buildings.for you to follow the step, which is regarding the
Now since you have known some few factsinstallation of the mast. This is an important step
regarding the installation of dish TV antenna,in antenna installation since there can be some
let’s discuss the steps that are involved inpossibilities of getting signals of various satellites.
successful installation of an antenna.The base of the antenna must be mounted firmly.
STEP — 1A bubble level is given with the must that would
First of all, you need to do some calculationhelp you to keep the bubble at the center.
regarding the three main co-ordinates, which areSTEP — 4
elevation, azimuth and tilt. The dish antenna is aIn this step, you need attach the mast and to do
part of a satellite TV kit in which a satellitethat you need to slide the antenna assembly to
receiver is also included. You need to connect thethe pivot point. Use the Azimuth bolts for this
receiver with your existing television set. Oncepurpose and don’t forget to tighten it.
you do it, you’ll get to see the instructionsVarious other steps such as cable routing and
regarding the calculation of co-ordinates on yourgrounding, fine tuning and the attachment of Low
television screen. The co-ordinates vary accordingNoise Blocks (LNB) are also involved in making a
to a place’s zip code and therefore youperfect dish antenna installation.
need to enter the zip code of your residentialInstallation of a dish antenna is quite a risky job.